Girly PUNISHER w/ cute BOW
decal sticker for car, laptop, yeti,
- die cut vinyl, no background
- color is solid NOT printed, will NOT fade.
- water proof, UV resistant
- rated to last 6 years outdoors and longer indoors
- removable, does not damage vehicle paint
To select a color not listed select "OTHER" then add note to seller at check out.
Apply to any clean smooth surface such as vehicle body, window, laptop, water bottle, mirror, helmet, guitar etc.
Photos not to scale. Rely on dimensions listed or measure area.
Ships in cardboard mailer for protection during shipping
Easy to install, comes with full instructions.
How to install vinyl decals:
1. Clean the area thoroughly with rubbing alcohol or soap and water. Do not use Windex or similar products, it will leave a residue behind that will prevent the sticker from adhering well.
2. Prepare the sticker for application by firmly rubbing a squeegee or credit card across the clear transfer tape. This removes any air bubbles that may have formed and makes the sticker cling to the transfer tape.
3. Peel the white paper backing off the sticker. If the sticker clings to the backing, slowly replace the paper backing and repeat Step 2.
4. Slowly lower the sticker onto the surface and rub it in place firmly with a squeegee or credit card. Wait 10 minutes or more. For best results, wait 24 hours before moving to the next step.
5. Slowly peel the clear transfer tape off at an angle. Be careful not to pull the sticker off the surface. If sticker pulls away from the surface repeat Step 4.
*Use a pin to poke any air bubbles in the center and push the air out through the hole.
*For best results do not apply a sticker in extreme hot or cold temperatures.
Thank you for visiting Inferno Decals!