(2) 500ml Motul RBF 600 Factory Line DOT 4 RACING BRAKE FLUID
100% Synthetic Fluid – DOT 4
For hydraulic actuated brake and clutch systems
Very high boiling point : 312°C / 594°F
TYPE OF USE
All types of hydraulic actuated brake and clutch systems requiring a non-silicone synthetic fluid. Specially designed to resist to high temperature of racing actuated brake (steel or carbon) and clutch systems. Exceeds DOT 5.1 and DOT 3 standards also, except for viscosity at -40°C (-40°F).
STANDARDS : FMVSS 116 DOT 4 / SAE J 1703 / ISO 4925 Extreme thermal resistance and stability : The very high boiling point (312°C / 594°F), superior to conventional DOT 5.1 non silicone base / DOT 5 silicone base fluids (260°C / 500°F mini) and DOT 4 (230°C / 446°F mini) enables an effective brake even under extreme conditions. Efficient when rainy : The very high wet boiling point (205°C / 401°F) superior to conventional DOT 5.1 non-silicone base fluid (180°C / 356°F mini) and DOT 4 (155°C / 311°F mini) enables to keep an efficient brake system when rainy. Indeed, DOT 3, DOT 4 and DOT 5.1 brake fluids have the property to absorb humidity in the air, which reduces their boiling points and increases the risk to get to “vapor lock” phenomena.The wet boiling point is measured by humidifying the product with about 3.5 % of water.
Avoid mixing with polyglycols based brake fluid with lower performances. Do not mix with silicone (DOT 5 silicone base) or mineral base fluids (LHM). Store brake fluid in its original container, tightly closed to prevent absorption of moisture. Aggressive chemical product if contact with hands, paint or varnish. If skin contact, rinse thoroughly with water.
100% synthetic fluid, polyglycol bases.
Dry boiling point 312 °C / 594 °F
Wet boiling point 205 °C / 401 °F
Viscosity at -40°C (-40°F) 1750 mm²/s
Viscosity at 100°C (212°F) 2.5 mm²/s